Nano additives such as graphene nanoplatelets (GNP), nano-rare earth additives etc., can be successfully be blending and uniformly dispersed in the micron sized powders. Following are some of the results showing uniform blending of some nano-composite powders used for thermal spray coating applications. Fig....
One of the leading manufacturers of fragrances in the world was looking for a mixer to mix 0.1% fragrance oil to a detergent powder, for research and development, across small batches from 20 grams to 1 kg and more. The current process involved manual...
Grinding wheels are made of natural or synthetic abrasive minerals bonded together in a matrix to form a wheel. The challenge in mixing is to mix phenolic resin and diamond abrasive grains, to get the most homogeneous mixing. The customer was using a conventional...
Homogeneous mix of binary, ternary and quaternary blended cements in dry state have been done in Alphie mixer. The raw materials used for making blends were Ordinary Portland Cement (OPC), fly ash, slag, calcined clay, limestone, calcium sulphate, etc. The raw materials had...
The Alphie mixer is extensively used to produce dosage forms especially suitable for paediatric (children) use. Orally disintegrating mini tablets are designed to disintegrate within a few seconds in the oral cavity. ODMTs are very beneficial because they give a pleasant mouth feel, cause...
The problem Traditionally, fireworks manufacturing is done manually, which is both highly labor intensive and unsafe. The sparkler powder viz. mixture of aluminum powder, barium nitrate and water composition is mixed manually. This not only makes the operator at risk, it also does not...
Diamond bits are used for drilling in concrete, reinforced concrete, masonry, and other natural materials. In producing diamond bits and diamond coring bits, powder mixer plays a major role. The problem One of our customers wanted to mix powders of Tungsten carbide, Cobalt and synthetic...
One of the India’s largest abrasive wheels manufacturing company was facing a challenge in getting the most homogeneous mixing, while mixing phenolic resin and diamond abrasive grains. We were ready to take up this homogeneous mixing challenge and offered our Alphie as an...
The problem One of our client’s application was to mix 20 kg of tungsten (90%) along with nickel and iron mixture to produce tungsten carbide tools. The resultant mixture was further made into 6 mm balls or into cuboids form. We were ready to...
The metal injection moulding (MIM) process combines the design flexibility of plastic injection molding with the strength and integrity of wrought metals to offer cost effective solutions for parts with highly complex geometries. Our customer one of India's largest MIM product manufacturing companies, located...
